Laser show projectors

Stacks Image 309
Whatever your need, we have the laser show projector for you. Our LaserNet projectors have been used and installed around the world. We can also make custom LaserNet projectors to fit your specifications and needs.

ScannerPro Projectors
Laser graphics & beam projector -- does everything ... laser graphics AND laser beams
The ScannerPro laser projector is for those who want to do graphics, as well as project an infinite variety of beam patterns. It is completely self-contained. The ScannerPro includes a solid state RGB or green air-cooled laser, high-resolution scanners, and an internal laser controller (Pangolin QuickShow) -- plus it can accept any standard external laser graphic controller.

LaserNet produces all ScannerPro projectors in house at our Miami based workshop. From the PC boards and wiring, to the making sure each projector has the tightest, brightest beam, each projector is made by hand by our team.

Below are our featured projectors and specs, along with compatible accessories.

ScannerPro 25 W RGB
Projector Specifications
  • Red: 637nm @ 6,800mW
  • Green: 532nm @ 10,000mW
  • Blue: 445nm @ 8,000mW
  • Class 4 with FDA/CDRH Compliance
  • High Resolution CTI 6215HP
  • 30k @ 8 degrees ILDA standard, 60 degree Optical Balanced Input on scanners and colors (full ILDA specifications)
  • Key switch
  • Emission indicator
  • ILDA standard input db25 connector
  • ILDA standard db25 pass thru
  • Remoteable safety interlock. Includes Laser on status indicators
  • Scanner speed failsafe
  • Internal physical shutter
  • Analog modulation
Stacks Image 333
Stacks Image 336
Stacks Image 339
Stacks Image 342
Laser output color depends on input laser beam
Solid state laser diode projectors with CTI 6215HP scanners.
Projector Features
Weight: 110 pounds
Dimensions: 32 x 20 x 10 inches
Clearance: Please allow for 3 inches off back for cable clearance
Aperture size: 3 x 4 inches / 7.6 x 10 cm (typical)
Mounting style: Shelf / Yoke
Power: Universal 90 to 240 VAC @ 15Amps
Cooling: Air, via internal fans.
Note: Unit must have 8 inches of obstruction free ventilation on each side.
Heat Dissipation: 600 Watts
Operating Temp: 10*C - 40*C
Stacks Image 352

ScannerPro OPSL 25W RGB
Projector Specifications
  • Red: 637nm @ 6,800mW
  • Green: 532nm @ 8,000mW OPSL Coherent
  • Blue: 445nm @ 8,000mW
  • Class 4 with FDA/CDRH Compliance
  • High Resolution CTI 6215HP. 30k @ 8 degrees ILDA standard, 60 degree Optical Balanced Input on scanners and colors (full ILDA specifications)
  • Key switch
  • Emission indicator
  • ILDA standard input db25 connector
  • ILDA standard db25 pass thru
  • Remoteable safety interlock. Includes Laser on status indicators
  • Scanner speed failsafe
  • Internal physical shutter
  • Analog modulation
Stacks Image 361
Stacks Image 364
Stacks Image 367
Stacks Image 370
Laser output color depends on input laser beam
Solid state laser diode projectors with CTI 6215HP scanners.
Projector Features
Weight: 95 pounds
Dimensions: 20in W x 9.75in H x 20in D
Clearance: Please allow for 3 inches off back for cable clearance
Aperture size: 3 x 4 inches / 7.6 x 10 cm (typical)
Mounting style: Shelf / Yoke
Power: Auto-ranging 90 to 240 VAC @ 15Amps
Cooling: Air, via internal fans.
Note: Unit must have 8 inches of obstruction free ventilation on each side.
Heat Dissipation: 600 Watts
Operating Temp: 10*C - 40*C
Stacks Image 380
Stacks Image 382

ScannerPro PURE 7 W RGBB LD
Projector Specifications
  • Red: 638nm PURE diode @ 1,500mW
  • Green: 520nm PURE diode @ 2,000mW
  • Blue: 445nm PURE diode @ 2,200mW
  • Blue: 462nm PURE diode @ 1,400mW
  • Class 4 with FDA/CDRH Compliance
  • High Resolution, 30K scanners
  • Anti-Reflective Aperture window with door
  • Balanced Input on scanners and colors (full ILDA specifications)
  • Com port & Remoteable safety interlock, includes Laser on and status indicators, and clock
  • Scanner Speed & Size Failsafe
  • High speed electronic modulation safety blanking function
  • Analog modulation
  • Key switch
  • Emission indicator
  • ILDA standard input db25 connector
  • ILDA standard db25 pass thru
  • Pure diode CW lasers, no DPSS
  • Internal physical shutter
  • Hanging Yoke
  • Available Option: FB4 built in
  • DMX available with use of ENTTEC dongle
  • Warranted against manufacturer's defects for 1 year
  • FDA Variance filed on client's behalf included (USA) & guaranteed approval
  • MADE IN USA
Stacks Image 394
Stacks Image 397
Stacks Image 400
Stacks Image 403
Laser output color depends on input laser beam
Projector Features
Weight: 20 pounds
Dimensions: 11 x 11 x 7.5 inches
Clearance: Please allow for 3 inches off back for cable clearance
Aperture size: 3 x 4 inches / 7.6 x 10 cm (typical)
Mounting style: Shelf / Yoke
Power: Universal 90 - 240VAC @ 5amps
Cooling: Air, via internal fans.
Note: Unit must have 8 inches of obstruction free ventilation on each side.
Heat Dissipation: 200 Watts
Operating Temp: 10*C - 40*C
Stacks Image 411
Stacks Image 413
Stacks Image 415

ScannerPro PURE 6 W RGBB
Projector Specifications
  • Red: 638nm PURE diode @ 1,200mW
  • Green: 520nm PURE diode @ 1,200mW
  • Blue: 445nm PURE diode @ 1,200mW
  • Blue: 462nm PURE diode @ 2,000mW
  • Class 4 with FDA/CDRH Compliance
  • High Resolution, 40K - Pangolin Compact 506 scanners
  • Balanced Input on scanners and colors (full ILDA specifications)
  • Scanner Speed Failsafe
  • Key switch
  • Emission indicator
  • ILDA standard input db25 connector
  • ILDA standard db25 pass thru
  • Remoteable safety interlock. Includes Laser on status indicators
  • Pure diode CW lasers, no DPSS
  • Internal physical shutter
  • Analog modulation up to 40k
  • Hanging Yoke
Stacks Image 424
Stacks Image 427
Stacks Image 430
Stacks Image 433
Laser output color depends on input laser beam
Projector Features
Weight: 18 pounds
Dimensions: 11 x 11 x 7.5 inches
Clearance: Please allow for 3 inches off back for cable clearance
Aperture size: 3 x 4 inches / 7.6 x 10 cm (typical)
Mounting style: Shelf / Yoke
Power: Auto-ranging 110VAC to 220VAC @ 5amps
Cooling: Air, via internal fans.
Note: Unit must have 8 inches of obstruction free ventilation on each side.
Heat Dissipation: 200 Watts
Operating Temp: 10*C - 40*C
Stacks Image 441
Stacks Image 443

ScannerPro PURE 3 W RGB
Projector Specifications
  • Red: 638nm PURE diode @ 700mW
  • Green: 520nm PURE diode @ 1,000mW
  • Blue: 445nm PURE diode @ 1,500mW
  • Class 4 with FDA/CDRH Compliance
  • High Resolution, 40K - Pangolin Compact 506 scanners
  • Balanced Input on scanners and colors (full ILDA specifications)
  • Scanner Speed Failsafe
  • Key switch
  • Emission indicator
  • ILDA standard input db25 connector
  • ILDA standard db25 pass thru
  • Remoteable safety interlock. Includes Laser on status indicators
  • Pure diode CW lasers, no DPSS
  • Internal physical shutter
  • Analog modulation up to 40k
  • Hanging Yoke
Stacks Image 455
Stacks Image 458
Stacks Image 461
Stacks Image 464
Laser output color depends on input laser beam
Projector Features
Weight: 18 pounds
Dimensions: 11 x 11 x 7.5 inches
Clearance: Please allow for 3 inches off back for cable clearance
Aperture size: 3 x 4 inches / 7.6 x 10 cm (typical)
Mounting style: Shelf / Yoke
Power: Auto-ranging 110VAC to 220VAC @ 5amps
Cooling: Air, via internal fans.
Note: Unit must have 8 inches of obstruction free ventilation on each side.
Heat Dissipation: 200 Watts
Operating Temp: 10*C - 40*C
Stacks Image 472
Stacks Image 474

LASERBRITE 1 W RGB
Projector Specifications
  • Output Power: <500
  • Aperture Position (cm): 6*4
  • Operating Mode: CW
  • Power Stability (RMS, over 4 hours): <5%
  • Warm up time: 5 minutes
  • Beam Divergence, full angle (mrad): <1.2
  • Beam diameter at the aperture: 3mm
  • Operating Temperature: 15-40*C
  • External Modulation: TTL
  • Expected Lifetime: 5,000 hours
  • System Control: This laser is controlled either by DMX, sound activation, or by any ILDA control software, like Pangolin QuickShow
  • Included: Hanging Yoke
Stacks Image 521
Stacks Image 524
Stacks Image 527
Stacks Image 530
Laser output color depends on input laser beam
Projector Features
Weight: 7 pounds
Dimensions: 11 x 9 x 4.25 inches
Clearance: Please allow for 3 inches off back for cable clearance
Stacks Image 538
Stacks Image 540

Main Control Panel
LaserNet's Main Control (Annunciator) Panel was designed for theatrical use where the laser operator is separated by a great distance from the emergency laser shut off function. The panel offers total remote control of up to four individual laser systems and adheres to all FDA requirements. The panel can also be tied to additional E-Stop push buttons located throughout the theater.
Projector Features
Weight: 6 pounds
Dimensions: 2U, standard 19" x 10" rack metal case
Power: 90 - 240VAC

Additional Information:
The front panel has an E-Stop button with an activation indicator LED. Either two (2) or four (4) power switches, key switches, and indicator lights for Contractor, Projector, and Laser.

Once the power switch is activated, the unit sends a low voltage signal to an optional SS Relay that switches on the main contractor and feeds the laser with AC power. When the laser receives power, a voltage is returned to the panel and the projector indicator LED illuminates, indicating the laser is in standby. By turning the key to the non-removable position, the laser applies power to the diodes, sends a voltage back to the panel, illuminating a green LED, and the system is ready for the show.

Pushing the Emergency Stop button instantly cuts the voltage to the laser diodes of all lasers connected to the panel. Once the emergency has been resolved, twisting the button will allow is to pop out into its normal safe position and power is restored to the lasers.

The rear of the panel has output connectors for the remote E-Stop, Laser Power, and Emission Status.

Note: If the power to the laser systems is controlled locally via an independent circuit breaker the SS Relay becomes redundant and unnecessary.

Connection to the Emission Status is done via XLR RJ-45 plug with a Cat 5 cable going to each laser.

4 - Channel Main Control Panel

Stacks Image 555
Stacks Image 558

2 - Channel Main Control Panel

Stacks Image 564
Stacks Image 567

SMPTE Timecode Reader & Network Switch
Specifications:
  • Built in TC 2000 Aquila SMPTE Timecode Reader with LaserNet Balaced Line Input Card and Netgear 8 port network switch
  • Supports all Pangolin products

Projector Features
Dimensions: 2U, standard 19" x 10" rack metal case
Power: 90 - 240VAC

Front Panel:
  • Mini Phono headphone / earbud jack to monitor the timecode
  • Indicators for Power, Read, and Write

Rear Panel:
  • SMPTE IN/OUT, 3-pin XLR
  • Will accept single ended of Balanced Line Input for Timecode
  • AUDIO IN, 3-pin XLR
  • USB port
  • Network switch - 8 Cat5 ports
Stacks Image 578
Stacks Image 580

LaserNet — Laser Production Network

Since 1968 … the world’s most experienced laser show company
20209 NE 15th Ct., Miami, FL 33179
(305) 690-6885 • fax (305) 690-6881
info@lasernet.com
 
Stacks Image p13_n63
Stacks Image p13_n65
Stacks Image p13_n67

Professional Memberships

Stacks Image p13_n8

 
Founding Member, since 1986, International Laser Display Association

Stacks Image p13_n13

 
Documented professionalism: ILDA Accredited Professional Lasershow Company since 2010

Stacks Image p13_n18

 
Member, International Association of Amusement Parks and Attractions

Stacks Image p13_n71
 

Member, International Live Events Association

Stacks Image p13_n28

 
Pangolin Authorized Dealer

Newsletter and more

Stacks Image p13_n36

 
You can
subscribe to our free email newsletter! Every month or so, you’ll find the latest projects and products from LaserNet.

Stacks Image p13_n41
 

Products designed and manufactured in the USA

Stacks Image p13_n46
 

Laser products sold by LaserNet are labeled in compliance with U.S. regulations.

An Important Headline

tray button
play pause